Epson 7000 service manual Flush Point Adjustment, Flushing Point 123

One press = 1/720 inch

"+" = toward HP and "-" = away from HP

EPSON Stylus Pro 7000 Revision B

FLUSH POINT ADJUSTMENT

This function corrects the flushing position of the carriage to make sure the carriage is properly positioned over the F Box during the flushing operation.

1.Put a piece of paper over the flushing box.

2.Make sure "Adj. Flush Point R" appears in the LCD, and press the Enter button.

3.The carriage moves to the flushing position and begins flushing.

4. After flushing is finished, "Point R NNN" (NNN = numeric position) appears. Check the piece of paper you put over the flushing box to confirm the ink is ejected into the flushing box. If the ink-flushing position is correct, press the Enter button to finish. Otherwise, press the SelecType or Item button to correct the flushing position. The settings increment as follows.

Correction distance: Direction:

x Flushing

Perform flushing operation
Flushing Point x:	-123
Use the item select Paper Feed [+] or [-]
button to adjust the flushing position
("+" = to HP, "-" = away from HP)		[Enter]	End

adjustment/

next menu

Figure 5-32. Flushing Point Check Operation

Adjustment Self-Diagnostic Mode Menus 188