Epson 7000 service manual Please Lower Lever, Ink Out, No INK Cartridge

EPSON Stylus Pro 7000 Revision B

„If the error recurs even after reloading the paper, make sure the paper-end sensor on top of the carriage is installed correctly and working properly.

PLEASE LOWER LEVER

†Problem

The printer is not able to continue paper feeding/initializing, printing, or ink sequencing because the Release lever was moved to the Release position. Or, the printer cannot begin printing because the lever is in the release position.

†Solution

„Pull the lever forward to the set position. However, if printing was interrupted because the lever was pushed back to the release position and the paper shifted, the print job may be marred.

„If the lever is forward down and this error still occurs, check the Release-Lever position sensor.

INK OUT

†Problem

One or more ink cartridges have run out of ink, a near-end cartridge has been reinstalled, or an unsupported ink cartridge has been installed.

†Solution

„ Replace the empty ink cartridge.

C A U When replacing an empty ink cartridge, always replace it with a new ink cartridge; otherwise the printer cannot determine how much ink remains.

„Make sure the ink cartridge is the proper type of cartridge for the printer and the proper color for that slot.

„If the proper cartridge is installed and this error still occurs, check the Ink-End sensor.

NO INK CARTRIDGE

†Problem

An ink cartridge is not installed or is not installed properly.

†Solution

„ Install the proper ink cartridge in the empty slot.

C A U When replacing an empty ink cartridge, always replace it with a new ink cartridge; otherwise the printer cannot determine how much ink remains.

„If the proper cartridge is installed and this error still occurs, check the Ink-Cartridge sensor.

Troubleshooting General Errors 102