Epson 7000 service manual Self-Diagnostics, Self-Diagnostic Mode Controls

EPSON Stylus Pro 7000 Revision B

5.3 Self-Diagnostics

This section gives detailed descriptions of all adjustments necessary to properly service and maintain this printer.

1.Make sure the Paper Set Lever is in the Set (forward) position.

2.Press the following buttons on the Control Panel while turning on the printer.

[Paper Feed +] + [Paper Feed -] + [Enter]

3.When "Check: Test" appears on the LCD, the printer has entered the Self- Diagnostic mode.

To exit the Self-Diagnostic mode, turn off the printer.

Use the Control Panel buttons to activate a Self-Diagnostic function, as described in the table below.

Table 5-3. Self-Diagnostic Mode Controls

Normal	Self-Diagnostic	Meaning
Function	Function
Pause	Return up one	Moves up one level (without selecting at
	level	item).
SelecType	Next menu	Displays the next menu.
Paper Source	Previous menu	Displays the previous menu.
Paper Feed +	Next item or value	Displays the next item or increases the value
		of the item shown on the LCD.
Paper Feed -	Previous item or	Displays the previous item or decreases the
	value	value of the item shown on the LCD.
Cut/Eject	Enter	Selects/activates the item.
Cleaning	Feed paper & cut

Jumps up a	Returns to
level	previous menu

Proceeds to

next menu

Goes to next or previous item

Selects or

activates

the item

Figure 5-1. Self-Diagnostic Controls

Adjustment Self-Diagnostics 164