Epson 7000 service manual Cutter Life Value, Printed Value Meaning

EPSON Stylus Pro 7000 Revision B

†Code page = PC 437 (US/Europe) or PC 850

†Version = Firmware version

†Ink Left = see below

E***** F		100~81% remaining
E****	F	80~61% remaining
E***	F	60~41% remaining
E**	F	40~20% remaining
E*	F	20%~near end
nn%		near end ~ ink end (Ink End LED = flashing)
0%		ink end (Ink End LED = on)

†Cutter Life

The values are approximate and will vary depending on usage.

Table 1-33. Cutter Life Value

Printed Value		Meaning
E*****F		100-81% remaining
E**** F		80~61% remaining
E*** F		60~41% remaining
E**	F	40~20% remaining
E*	F	20~1% remaining
E	F	less than 1% remaining

When the cutter life = less than 1%, the cutter should be checked (it is OK if it cuts a clean, straight line) and replaced if necessary. This is a subjective check and the cutter does not have to be replaced if it still cuts properly.

Users can replace the cutter themselves.

†Page count = total number of printed pages (max. six digits)

†Ink Pad = waste ink count, see below

E***** F 100~81% remaining

E****	F	80~61% remaining
E***	F	60~41% remaining
E**	F	40~21% remaining
E*	F	20~1% remaining
E	F	Less than 1% remaining (Maintenance Req 0100)

when the ink pads are calculated to be full, Service Req. 00000100 occurs and the printer cannot print.

After replacing the waste ink pads, clear the waste ink counter with Maintenance Mode 2. See page 50.

†CR Motor life = Monitors carriage passes to notify when ink tubes need replacing. See above for count explanation. Service Req. 00000101 occurs when the count equals 0.

†PF Motor life = Monitors the feed drive mechanism. See above for count explanation. No fatal error.

†Head = Keeps track of the number of dots fired from the head according to color. The color that has been fired most is shown on the Status Sheet. See above for count explanation. No fatal error. Part replacement is determined on site.

†Cleaner = Keeps track of the number of head cleaning operations (wiping/rubbing). See above for count explanation. No fatal error. Part replacement is determined on site.

Product Description SelecType Settings 43