Epson 7000 service manual ADJ Check Nozzle, Please Set Paper, Printing Pattern Nozzle Check End

EPSON Stylus Pro 7000 Revision B

ADJ CHECK NOZZLE

After the initial ink charge, this function verifies that the nozzles are properly firing ink If the some nozzles are not firing correctly or at all, you can run the cleaning operation from this menu.

1. Make sure "Adj: Check Nozzle" appears on the LCD and press the Enter

button.

Please Set Paper

Load paper.

Please Set Ink

Replace any low or empty ink cartridges.

2. Load paper if not already loaded and replace any low or empty ink

cartridges if detected. If these conditions are OK, the printer prints the

following check pattern

.

Printing Pattern

Nozzle Check End

[SelecType]

[Enter]

End

adjustment/

proceed to

next

Figure 5-17. Head Nozzle Check Pattern

The pattern includes the following colors from left to right; black, cyan, magenta, yellow, light magenta, and light cyan.

3.When the check pattern is finished printing, "Nozzle Check End" appears on the LCD. If the pattern printed all six colors properly with no lines or dots missing, press the Enter button to end this adjustment procedure. If lines or dots are missing, press the SelecType button to start the cleaning cycle.

Cleaning Standard

Print Adj. Pattern

Figure 5-18. Nozzle-Check Printing Operation

Adjustment Self-Diagnostic Mode Menus 178