Epson 7000 Cleaner Head, Screw M4x6 + Screw Driver, Maintenance Base Assembly Screws M4x6

EPSON Stylus Pro 7000 Revision B

6.Perform steps 1 and 2 of the “Replacing the Waste Ink Pads” on page 126.

7.Remove the four (CUPS M4x6) screws securing the Maintenance Base Assembly to the printer main body and remove the Maintenance Base Assembly.

Screw (M4x6)

(+) Screw

Driver

Figure 4-65. Removing the Maintenance Base Assembly - 1

Screw (M4x6)

(+) Screw

Driver

Figure 4-66. Removing the Maintenance Base Assembly - 2

Maintenance

Base Assembly

Screws (M4x6)

Figure 4-67. Removing the Maintenance Base Assembly - 3

8.Shift the Maintenance Base Assembly to the left to release the joint with the R Side Frame. Then, watching out for the harnesses, lower the Maintenance Base Assembly and remove it.

Pump Motor

Assembly

Cap Assembly

Flushing Box

Assembly

Cleaner

Head

Pump

Assembly

Figure 4-68. Maintenance Base Assembly

Disassembly & Assembly Disassembly Flow 144