EPSON Stylus Pro 7000

Revision B

6.1.3Important Maintenance Items During Service Operations

Check the following items during printer maintenance/service and perform any necessary operations.

Table 6-3. Items to be Checked During Maintenance/Service

Items

 

Check Points

 

Remedy

 

 

 

 

 

 

 

Make sure no paper,

 

Cleaning (If there is an

Lower Paper Guide

 

 

ink stain, wipe with

 

dust, or foreign objects

 

and the surface of the

 

are attached or have

 

dry, clean cloth after

Subplaten

 

accumulated.

 

cleaning the ink stain

 

 

 

with damp cloth.)

 

 

 

 

 

 

 

 

 

 

 

Make sure there is no

 

Loosen the

 

 

gap between the caps

 

maintenance bracket

 

 

and printheads when

 

Capping position

 

 

screws, push up the

 

the carriage is in the

 

 

 

 

bracket, and secure the

 

 

capped position (look

 

 

 

from above)

 

screws.

 

 

 

 

 

 

 

 

 

 

 

Make sure no dust or

 

 

 

 

foreign objects are

 

1) Cleaning

T-Fence

 

attached or have

 

 

accumulated, and

 

2) Replace if there are

(Step ruler)

 

 

 

make sure it is not

 

any rips or stains

 

 

 

 

 

ripped, bent, or

 

 

 

 

stained.

 

 

 

 

 

 

 

Rail on the CR guide

 

Make sure there are no

 

 

 

foreign objects

 

Cleaning

frame

 

 

 

attached.

 

 

 

 

 

 

 

 

 

 

 

P_REAR sensor and

 

Make sure no paper,

 

 

 

dust, or foreign objects

 

 

P_FRONT sensor

 

 

Cleaning

surface

 

are attached or have

 

 

 

accumulated.

 

 

 

 

 

 

 

 

 

 

 

6.1.4 Lubrication and Glue

Unlike the EPSON Stylus Pro 9000, this printer requires some grease and glue as described below.

Table 6-4. Grease and Glue Application

Type

 

 

Name

 

Amount

 

Company

 

Part #

 

Location

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Carriage

 

 

Super-Multi Oil #32

 

n/a

 

 

 

n/a

 

rail

Grease

 

 

 

 

 

 

 

 

 

 

bearings

 

 

 

 

 

 

 

 

 

 

 

 

 

 

G-26

 

40g

 

EPSON

 

 

 

Other parts

 

 

 

 

 

 

B702600001

 

on

 

 

(Molicoat EM-60L)

 

(n/a)

 

(Dow Corning Asia)

 

 

 

 

 

 

 

 

 

 

 

 

 

mechanism

Glue

 

 

Screw lock

 

1,000g

 

EPSON

 

B730200200

 

Screw lock

 

 

 

 

 

 

 

 

 

 

 

(blue)

 

 

 

 

 

 

 

 

 

 

 

 

C A U

Do not apply any other oils, lubricants, or glues than those

 

 

 

described in this manual; otherwise printer parts may be

 

 

 

damaged or their useful life may be shortened.

 

 

Maintenance

General Maintenance Issues

207

Page 207
Image 207
Epson 7000 Important Maintenance Items During Service Operations, Lubrication and Glue, Grease and Glue Application