Epson 7000 service manual Maintenance Record Items, Revision and Head Signal

EPSON Stylus Pro 7000 Revision B

†Record: Maintenance menu

[Pause] returns you to previous menu

[SelecType]

Fire B:	XXXX
Fire C:	XXXX
Fire M:	XXXX
Fire Lc:	XXXX
Fire Lm:	XXXX
Fire Y:	XXXX
Cut:	XXXX
Cut Solen	XXXX
Lock Solen	XXXX
Waste Ink R:	XXXX
Waste Ink L:	XXXX

HeadWiper R: XXXX

HeadWiper L: XXXX

Wiper XXXX

HeadRubingR XXXX

HeadRubingL XXXX

Rubbing	XXXX
Lever	XXXX
Cover	XXXX
Ink Lever R:	XXXX
Ink Lever L:	XXXX
CR Motor	XXXX
PF Motor	XXXX
Ink Tube	XXXX
PrintNumber XXXX
Cleaning	XXXX

[Item]

Table 5-9. Maintenance Record Items
Item	Description
Fire x	Amount of ink fired from nozzles in number of megadots (x
	= which color)
Cut	Number of times cutter has been used
Cutter Solenoid	Number of times cutter solenoid has been activated
Lock Solenoid	Number of times CR lock solenoid has been activated
Waste Ink R/L	Amount of waste ink (right or left)
Head Wiper R/L	Number of times head wiping operation has occurred
Wiper	Number of times wiper has been used
Head Rubbing R/L	Number of times B/C head rubbing operation has occurred
Rubbing	Number of times rubbing pad has been used
Lever	Number of times paper has been set (up and down = one
	time)
Cover	Number of times front cover has been opened (open and
	close = one time)
Ink Lever R/L	Not used
CR Motor	Accumulated travel distance of carriage (in Km)
PF Motor	Accumulated travel distance of paper feed mechanism (in
	Km)
Ink Tube	Number of carriage passes
Print Number	Accumulated printout count (each Form-Feed code = one
	printout)
Cleaning	Accumulated number of cleaning operations

Figure 5-12. Maintenance History Menu

D/A REVISION AND HEAD SIGNAL

NOTE: The options above appear on the LCD starting from “Waste Ink R”.

For factory use only to check the head voltage and pulse. Do not use.

Adjustment Self-Diagnostic Mode Menus 173