Epson 7000 service manual Maintenance Request, Head Alignment Menu, Display Messages, ADJUST. Patt

EPSON Stylus Pro 7000 Revision B

Table 1-37. Head Alignment Menu

Display Messages	Item	Notes
	STD	Select the thickness, to 0.1mm, of the
PAPER THICK		paper you are using to check the platen
	0.0~1.6mm
		gap. Normally, leave set to Standard.
ADJUST. PATT.	All	Selects which patterns to print. (All
	#1~12	patterns or selected patterns only.)
#1	1~4~7	Bi-D adjust 1 (200cps, Normal Dot, left)
#2	1~4~7	Bi-D adjust 2 (200cps, Normal Dot, right)
#3	1~4~7	Bi-D adjust 3 (200cps, Micro Dot, left)
#4	1~4~7	Bi-D adjust 4 (200cps, Micro Dot, right)
#5	1~4~7	Bi-D adjust 5 (300cps, Normal Dot, left)
#6	1~4~7	Bi-D adjust 6 (300cps, Normal Dot, right)
#7	1~4~7	Bi-D adjust 7 (300cps, Micro Dot, left)
#8	1~4~7	Bi-D adjust 8 (300cps, Micro Dot, right)
#9	1~4~7	L/R adjust 1 (200cps, Normal Dot)
#10	1~4~7	L/R adjust 2 (200cps, Micro Dot)
#11	1~4~7	L/R adjust 3 (300cps, Normal Dot)
#12	1~4~7	L/R adjust 4 (300cps, Micro Dot)

Note: The underlined item equals the default.

1.7 Maintenance Request

There are several consumable parts in the printer, and the printer employs separate counters to keep track of each one. The “Maintenance Req. 0100” message appears on the display to warn the user when the Waste Ink pads are about 99% full.

The printer can continue to print even though the “Maintenance Req. 0100* message appears instead of the “Ready” or “Printing” message. However, when the waste ink counter determines the Waste Ink pads are 100% full, the “Service Req 00000100” message appears and the printer can no longer print.

To clear this condition, perform the following.

Replace:	The following items must be replaced.
	- Waste Ink Pads
	- Pump Assembly
	- Cap Assembly
	- FBox
	- Cleaner, Head

C H E The above mentioned items are available as a kit.

P O I

Description: MAINTENANCE KIT

Parts code: 1054038

Required Adjustments: Perform the following adjustments after replacing the maintenance parts.

- Waste Ink Counter Clear

(See “Maintenance Mode 2” on page 50)

- Cleaner Counter

(See “Maintenance Mode 2” on page 50)

Product Description Maintenance Request 47