Epson 7000 service manual LED Indicators, LED Indicator Lights, Status Condition

EPSON Stylus Pro 7000					Revision B
LED INDICATORS
		Table 1-23. LED Indicator Lights
LED		Status		Condition
	•	On	•	Power on
Operate	•	Flashing	• Receiving data or performing power-down
				sequence
	•	On	• No paper loaded, end of roll, sheet/roll paper
	•	Flashing		error, paper set lever is in release position, or
Paper Out				the loaded paper is too thick for cleaning
			• Paper jam, paper cutting, paper skew, or paper
				check error
	•	On	•	Paused
Pause	•	Flashing	• Performing head cleaning or the printer is in
				ink drying phase. Also flashes during ink
				charging operation.
Ink Out Y	•	On	•	Ink out*
	•	Flashing	•	Ink low
Ink Out LM	•	On	•	Ink out*
	•	Flashing	•	Ink low
Ink Out LC	•	On	•	Ink out*
	•	Flashing	•	Ink low
Ink Out M	•	On	•	Ink out*
	•	Flashing	•	Ink low
Ink Out C	•	On	•	Ink out*
	•	Flashing	•	Ink low
Ink Out K	•	On	•	Ink out*
	•	Flashing	•	Ink low
	•	On	•	Auto cut selected
Roll Auto Cut	•	Flashing	• Roll paper not set or roll paper and cut sheet
				sizes are different
Paper Type	•	On	• Roll paper will not be cut
	•	Flashing	• Roll paper not set or roll paper and cut sheet
(Cut Off)
				sizes are different
	•	On	• Single sheet printing mode.
Sheet	•	Flashing	• Roll paper not set or roll paper and cut sheet
				sizes are different

Note: *Also occurs if no cartridge is installed or the wrong cartridge is installed.

Product Description Control Panel 35