Epson 7000 USB ID Copy/Backup, Extracting the USB-ID Copy Program, After Extracting the Program

EPSON Stylus Pro 7000 Revision B

5.6 USB ID Copy/Backup

Each printer has a unique USB ID which is stored in the NVRAM (EEPROM) on the C299MAIN board. The USB ID is unique for each printer in the same way a serial number is unique.

Example USB-ID: NE001XXXXXXXXXXXX0 (X =0~9 or A~Z)

If you need to replace the C299MAIN board during service, then you first need to copy and back up the USB ID. This operation requires the exclusive SP7000 USB-ID Copy Program as well as:

„PC with MS-DOS or Windows 95

„Parallel interface connection (compatible mode)

EXTRACTING THE USB-ID COPY PROGRAM

†SP7000 USB-ID Copy Program

Found on the #F733: Self Training Kit (P/N: 1053426) File:/AD_PRO_E/Spro7000.exe (self-extracting file)

extract the file to a folder you make on the root directory of your hard drive (example: C:/SP7000/ )

†PC equipped with Windows 95 or MS-DOS6.2 or above

†Parallel interface connection

AFTER EXTRACTING THE PROGRAM

1.After extracting the program, confirm that the following files exist:

„readme_e.txt

„Spro7000 versionlist.PDF file (tracks upgrades)

„Spro7000.EXE file (program file)

2.Read the readme file before using the program

3.See the next page.

Adjustment USB ID Copy/Backup 201