Epson 7000 service manual Cover Open, Paper Not Cut

EPSON Stylus Pro 7000 Revision B

	Table 3-12. Cover Open
Item	Description
LCD	Cover Open
message
LED indicator	N/A
status
	The front cover is open.When the cover is open the CR cannot
Details	move and no printer operations such as cleaning can be
	performed. If the cover is left open for a long period of time, the
	printheads may be affected adversely.
	Close the front cover. The printer automatically returns to the
	pre-error state; i.e. “Ready” or “Paused”.
	If the cover is opened during printing, printout quality may
	suffer. If you have to open the cover for some reason while the
Recovery	printer is printing, first press the Pause button to decrease the
	chance of adversely affecting printout quality.
	If this error occurs even though both sides of the cover are
	securely closed, check the cover-open sensor (interlock switch)
	on the left side for proper operation and position.

	Table 3-13. Paper Not Cut
Item	Description
LCD	Paper Not Cut
message
LED indicator	Paper Check indicator flashes.
status
	Paper cut error occurred.
Details	The page was not cut entirely or the page was cut unevenly and
	part of it still covers the P-FRONT sensor.
	Open the front cover and remove any cut paper that has not
	fallen. If necessary, cut the paper above the P-FRONT sensor
	with scissors. The LCD will display the “Set Paper Correctly”
Recovery	message. Move the Paper Set Lever to the release position and
	after making sure the leading edge is even, properly reload the
	paper. If the error is due to a worn cutter blade, replace the
	blade. Make sure the cutter and cutter solenoid are installed and
	working properly.

Troubleshooting Troubleshooting Using the Error Messages 88