Epson 7000 service manual Removing the Ink Cartridge Sensor, Slot frame Hooks

EPSON Stylus Pro 7000 Revision B

4.2.3.10 Removing the Ink Cartridge Sensor

1.Remove the Ink Cartridge Slot as described in “Removing the Ink Cartridge Holder & Slots” on page 137.

2.Remove the Ink Cartridge Sensor cable from the hooks as shown below, and then remove the cable completely through the bottom.

Slot frame

Hooks

4.Remove two screws (CUPS M3x6) securing the needle frame and remove the frame.

5.Remove one screw (CBS M2x8) securing the I/C sensor to the needle

frame and remove the I/C sensor.

I/C sensor One screw

Figure 4-56. Ink Cartridge Sensor Cable Removal

Figure 4-58. I/C Sensor Removal

3.Remove the screw (CBS M3x10) securing the Ink Low sensor and remove the sensor.

I/C slot needle

Two

screws

(M3x6)Ink Low

sensor

One screw

(M3x10)

Figure 4-57. Ink Low Sensor Removal

Disassembly & Assembly Disassembly Flow 140