Epson 7000 service manual Return Paper Lever, Load Ink Cartridge, Replace Ink Cartridge

EPSON Stylus Pro 7000 Revision B

	Table 3-16. Return Paper Lever
Item	Description
LCD	Return Paper Lever
message
LED indicator	N/A
status
	The Paper Set Lever was moved to the release position during
	operation. Similar to leaving the front cover open for long
Details	periods of time, leaving the Paper Set Lever in the release
	position (during operation) can have an adverse affect on the
	printheads.
	Return the Paper Set Lever to the set (forward) position.
	The printer automatically returns to the pre-error state; i.e.
	“Ready” or “Paused”.
Recovery	Moving the Paper Set Lever during printing may cause a decline
	in printout quality and is not supported by EPSON.
	If after returning the Lever to the set position this error does not
	clear, check the operation and connection of the Paper Set Lever
	sensor.

	Table 3-17. Load Ink Cartridge
Item	Description
LCD	Load Ink Cartridge
message
	N/A
LED indicator	The Ink End indicators only function when the ink is low/empty,
status	when there is no ink cartridge, or when an ink cartridge is loaded
	in the incorrect slot.
Details	Only occurs during ink cartridge replacement.
	Finish replacing the ink cartridge(s) and close the ink cartridge
Recovery	holder door.The printer automatically returns to the pre-error
	state; i.e. “Ready” or “Paused”.

		Table 3-18. Replace Ink Cartridge
Item		Description
LCD		Replace Ink Cartridge
message
LED indicator		The Ink End indicator for the incorrect slot (if an ink cartridge is
status		installed in the wrong slot) or empty ink cartridge is on.
		The ink-end error appears after the ink-end sensor detects the
		near-end condition and then a predetermined amount of ink is
		ejected. Also, if an ink cartridge that is already in the near-end
Details		condition is loaded, the printer will automatically produce this
		error.
		In cases where an ink cartridge is loaded in the wrong slot or an
		unsupported ink cartridge is loaded, this error also occurs.
		If an ink cartridge is empty, replace it with a new cartridge. Do
		not load a previously used ink cartridge; otherwise the ink
		counter will not work properly.
Recovery		If the wrong cartridge is loaded, replace it with the correct
		cartridge.
		If this error occurs even after replacing the old cartridge with a
		new cartridge, check the operation and connection of the
		corresponding ink-out sensor.
C A U	Do not insert used ink cartridges into the printer. Doing so will
	cause the ink counter to function improperly.

Troubleshooting Troubleshooting Using the Error Messages 90