Epson 7000 service manual Printable Area, Optimal Margin Settings

EPSON Stylus Pro 7000 Revision B

1.1.4 Printable Area

PW

LM

Paper
Feed	Printable Area

RM

TM

PL

BM

Table 1-7. Printable Area

Heading	Roll Paper	Cut Sheets
PW (width)	210 ~ 610mm	210 ~ 610mm
	(8.27 ~ 24”)	(8.27 ~ 24”)
PL (length)	Max. 90m	297~915mm
	(298.8’)	(11.8~36.4”)
LM (left margin)	3mm/15mm*	3mm
	(0.12~0.59”)
TM (top)	3mm/15mm*	3mm
RM (right)	3mm/15mm*	3mm
BM (bottom)	3mm/15mm*	14mm

Note: *The size of the margin is determined by the control panel setting.

There are three margin settings via the control panel;

„3mm = All margins are set to 3mm

„15mm = All margins are set to 15mm

„T/B 15mm TM and BM are 15mm, while LM and RM are 3mm

Table 1-8. Optimal Margin Settings

To optimize for	Select this setting
largest printable area and decrease chance of paper	Top/Bottom 15mm
rubbing printheads
exact paper size and decrease chance of paper rubbing	15mm
printheads
largest printable area and exact paper size	3mm

When the Paper Set Lever is:

Figure 1-1. Printable Area	„	Back
		The feed path is open and you can load, remove or change the
		position of paper in the feed path.
	„	Forward
		The feed path is closed and loaded paper is locked in place. You can
		print on the loaded paper.
		(It is not possible to change the lever position during printing.)

Product Description Features 17