White Rodgers F95-391 Humid, Daylight, Outdoor Temperature Sense, Keypad Lockout Menu, Time

		SENSOR
	L	A	B
MOR	AVG	HI	LO
DAY	HI	AVG	LO
EVE	HI	AVG	LO
NHT	AVG	HI	LO

In the	MOR	and	NHT	periods, the
sensor on the upper level (sensor A)
has more priority than the lower level
(sensor L), so the system will operate
to keep the temperature at the set point
in the upper level. In the				DAY	and
EVE	periods, the lower level has the
higher priority, so the system will
operate to keep the temperature at the
set point on that level. The sensor in
the guest bedroom has the lower
priority of the sensors. If there is a
guest, the sensor in that room (sensor
B) should be changed to				AVG	or HI
for periods when that room will be

used. To assign priority to a sensor,

press	PROGRAM	VIEW	to advance
the time period you wish to modify,
then press the		HUMIDITY	button. On
the display in place of period of day
(MOR, DAY, EVE, NHT)			the priority
of the sensor and the sensor identifica-
tion will appear. Press the			HUMID-
ITY	button to step through the sensors
that are installed and enabled			L (local),
A, B or C. Only sensors that are
installed and enabled will be listed.
When the sensor you wish to change is
displayed, press the		DAYLIGHT
SAVING TIME		key to change the

priority (AVG, HI or LO). AVG is the

default setting. A setting of	HI gives a
sensor more importance and a setting
of LO gives less importance.
Outdoor Temperature Sense.
(User menu, Step 16)	A remote sensor

(F145-1378) may be installed for outdoor temperature measurement.

The sensor must be properly con-
nected and enabled using the User
menu. The display shows the outdoor
temperature from -40		° to 140	° F by
pressing the light button twice within
one second when the thermostat is in
program run or hold mode.
KEYPAD LOCKOUT MENU
The keypad lockout menu allows you
to partially or totally lock out the
keypad depending on your system or
personal requirements. To enter the
keypad lockout menu you must first
enter the User Menu, while in the User
Menu press	TIME	FWD and	TIME
BACK the same time for at least one
second. Press	TIME	FWD	to
advance through the menu options.

10