Programmable Dehumidification
Optimal Dehumidification Mode
(OPTM DHUM)
(User Menu step 6) | When turned on | |||
this feature automatically reduces |
| |||
indoor humidity if humidity is 2% |
| |||
above setting. Humidity is set by |
| |||
pressing the | HUMIDITY | button | ||
when in the appropriate mode, in this |
| |||
case Cooling, and pressing the |
| |||
or | buttons to set desired |
| ||
humidity level followed by pressing |
| |||
RUN | PROGRAM |
| . This dehumidifi- | |
cation feature may use more energy by making dehumidification a priority initiating a call for cooling if humidity is 2% above desired setting. This feature may also
Fahrenheit or Celsius
Temperature Display.
(User menu, Step 7) This thermostat
is factory set to display temperature in Fahrenheit. If you prefer, you may configure the thermostat to display
Celsius. See the |
| CONFIGURATION |
Section, page 4. |
|
|
Single Period Fan Control. | ||
(User menu, Step 8) | This feature | |
allows you to have the fan run for a | ||
predetermined period of time by | ||
pressing the | FAN | key twice within 1.5 |
seconds. If a time is set in the User menu (page 4, step 8) the display will
show FAN, # hrs and PRG FAN ON for six seconds. After six seconds the display will continue to indicate PRG FAN ON for the time period selected. After this time period, the fan will return to normal operation. To return the
fan to normal operation before the end of the time period, press the FAN button.
Beeper on.
(User menu, Step 9) The thermostat has a beeper that will emit a tone when any key is pressed. In the user menu, the BEEP feature can be turned OFF using
or | to provide silent key |
operation. |
|
Heat Fast.
(User menu, Step 10) This feature, when set to ON, will bring the second stage of heating on any time you manually raise the temperature three or more degrees above room temperature. If HEAT FAST is set to OFF, the thermostat will delay the second stage from 0 to 30 minutes based on how well the first stage is keeping up with your setting.
8
