Humidifier Control and Monitoring
When the humidity button is pressed
while in the run mode and in theHEAT position, the actual humidity will be displayed on the left side of the
display. HUMD is displayed above the actual humidity. The humidity set
point is displayed on the right side of
the display. | or | button |
may be pressed to modify the humidity set point (range 5 to 50). Maximum displayed humidity is 97% RH and minimum displayed humidity is 2% RH. If the heating system is operating and there is a demand for humidity,
then the humidifier will operate. If the demand for humidity is not satisfied for ten consecutive heat cycle operations, the display will show the word HUMD for one second and the word MX for one second signaling maximum possible humidity is
reached.
FAQs |
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
| |||
1. My thermostat is reading | Press | TIME | FWD | and TIME BACK | at the same time to enter the configuration menu. Press |
|
| |||
Celsius. How do I change it | TIME FWD | until you get to | ° C then press the | or | arrow to select | ° F, press | ||||
to Fahrenheit? | PROGRAM | RUN to return to normal operation. |
|
|
|
| ||||
|
|
|
|
|
|
| ||||
2. How do I bypass (not | Press | PROGRAM | RUN | to make certain the thermostat is in the run program mode, then |
|
| ||||
use) the program? | to bypass the program and operate the thermostat manually press the |
| MODE SYSTEM | button | ||||||
| to select Heat or Cool (whichever you prefer) and press |
| HOLD . Use the TEMP | or | ||||||
| TEMP | buttons to set the thermostat on the temperature you want. The temperature |
|
| ||||||
| setting you choose will be held until you manually change it using the |
| TEMP |
| or | |||||
| TEMP | buttons. The thermostat will remain in the |
| HOLD mode when you change |
|
| ||||
| temperature and maintain whatever temperature you set. If you decide to return to the |
|
|
| ||||||
| program, press | PROGRAM RUN | to cancel the hold feature. |
|
|
|
| |||
|
|
|
|
|
|
|
|
|
|
|
26
