White Rodgers F95-391 Programming, Manual Operation, HEAT or, Entering Your Program, or TIME

PROGRAMMING

MANUAL OPERATION

(Bypassing the Program)
Your White-Rodgers 90 Series
thermostat can be used to control
temperature manually (without
programming). For manual operation,
press	SYSTEM	to select	HEAT or
COOL, then press PROGRAM
HOLD	Use	or	to set the
temperature as desired.

PROGRAMMED OPERATION Planning Your Program

The sample schedule (pages 14 & 15) shows the factory-installed programs for heating and cooling. The heating and cooling programs are separate, and must be programmed individually. To use the factory program, set the clock and press PROGRAM RUN

with the thermostat set to Heat, Cool, or Auto. Fill out the blank schedules (pages 16 & 17) with the time and temperatures you want in your program. Fill in every space for your program.The same temperature can be repeated more than once if you do not want the temperature to change over several time periods. This is useful for homes or businesses that are occupied all day and only want a setback temperature at night.

Entering Your Program

To Set the Clock:
1.	Press	PROGRAM		RUN .
2.	Press	SET	TIME . The display will
show the hour. Use			TIME	FWD or
TIME		BACK	to set to the current hour
and AM/PM designation.

3. Press	SET	TIME	again. The display
will show minutes. Use			TIME	FWD
or TIME	BACK	to set to the current
minutes.
4. Press	PROGRAM		RUN .
To Set the Day:
5. Press	SET	DAY	. The display will
indicate a day of the week. Use				TIME
FWD or	TIME	BACK to set to the
current day of the week.
6. Press	PROGRAM		RUN .
To Set the Program:
7. Press the	SYSTEM		button to select
HEAT (for heating program) or				COOL
(for cooling program).
8. Press	PROGRAM		VIEW	one time.
The display will show			MOR, the
settings for time and temperature and
MON.

12