of 85 ° F. If this happens, set the clock
and day of the week (using steps 1 |
| |
through 6 from “Entering Your |
| |
Program”, page 12 & 13), then select |
| |
HEAT, COOL | or AUTO | using the |
SYSTEM | button, and press | PRO- |
GRAM | RUN to resume operation | |
with your previously set program.
Compressor
Short Cycle Protection.
Your thermostat can be configured to protect your system against premature
compressor failure by “locking out” the compressor. This ensures that the compressor will stay off for at least five minutes on each cycle. When the thermostat is in compressor
the word COOL will flash. During this period, the compressor will not be energized. See the installation instructions.
Service Button Menu
The Service button allows setting of maintenance reminders for three
optional equipment accessories typically used with forced air heating/ cooling systems. The three accessories humidifier, air filter, and UV light are designed to enhance indoor air quality. A humidifier will add humidity when conditions would normally make the indoor air uncomfortably dry. Air filters are designed to clean the air through a forced air system. These accessories require routine mainte- nance to provide optimum perfor- mance. The service button mainte-
nance reminders are designed so that they can be customized to the requirements of each accessory. If your system is a forced air system you may have none or all three accessories. The fourth maintenance reminder is for routine servicing of your system by a
21
professional HVAC contractor. The fourth reminder option may be used in lieu of or in conjunction with the other reminders. If you’d prefer having a professional service your system, the Routine Maintenance Reminder is the only reminder you’ll need to set. To disable a feature that was previously
selected, press TIME BACK button to
show either REM PAD TIME, REM
FLTR TIME, REM UV TIME, or REM SERV TIME and then press the
or | arrow to turn | OFF | . |
Features
