Programming For DVD
Most GE, RCA and ProScan DVD systems will not require programming. Check to see if your DVD system responds to the remote before you begin programming.
1.Manually turn on the DVD system. Find the three digit code for your DVD system in the code list below.
2.Press and hold the CODE SEARCH button until the INDICATOR LIGHT lights, then release the CODE SEARCH button.
CODE
SEARCH
INDICATOR
LIGHT
DVD
3.Press and release the DVD button (The INDI- CATOR LIGHT will blink then remain lit.
4.Enter the code using the Number Buttons. After your code is entered, the INDICA-
TOR
LIGHT will turn off. If the code is not valid, the
INDICATOR LIGHT will blink. Check the code list and repeat process.
|
|
| (BLINK) |
1 | 2 | 3 |
|
4 | 5 | 6 |
|
7 | 8 | 9 | (OFF) |
| 0 |
|
|
|
| ON•OFF | |
5.Aim the remote at your DVD system and press the ON•OFF but- ton. Your DVD system should turn off.
DVD CODE
6.If the DVD System responds, no further programming is required.
NOTE: If your DVD does not respond, try all the codes for your brand. If the codes do not work, or your brand is not listed, try the Code Search method.
7.Enter your code here for easy reference.
CODE LIST
7
