OPERATING THE AM/FM TUNER
1.Press the AUDIO button.
2.Press the TUNER (3) button.
3.Press the AM/FM button to toggle between AM and FM.
4.Use the Preset
OPERATING A HOME THEATER SUR- ROUND SOUND SYSTEM
With GE receivers, a second press of the TV button should turn the receiver on.
1.Turn the TV on.
2.Press the AUDIO button
3.Select the audio input either by using the labeled number buttons or the
FUNCTION button.
4.Press the VOL+ or VOL- buttons to control volume.
NOTE: The Volume buttons may operate both TV and receiver volume at the same time.
If this presents a problem, it may be resolved by disabling the TV speakers by going into the TV menu.
CONTROLLING THE SURROUND SOUND FEATURE
The Surround Sound feature may be turned ON/OFF by pressing the SURR ON•OFF but- ton.
1.Press the SURR MODE button until the desired mode is found.
2.Press DELAY+ or DELAY- to achieve the desired delay effect.
3.Press the DSP ON•OFF button to turn DSP (Digital Sound Processor) ON or OFF.
4.Press the DSP Button until the desired effect is achieved.
5.Press the TEST button to listen to speaker levels.
6.Press FRONT, CENTER, or REAR buttons to select speakers.
7.Press the LEVEL+ or LEVEL- buttons to adjust speaker levels.
13
