Troubleshooting
Symptom
The display shows ‘BAD VERSION ’.
The display shows ‘SYS UNSUPP ’.
The display shows ‘MOUNT ERR ’.
The display shows ‘ERROR ’or ‘ENGINE ERR ’.
Some of the system settings have changed, such as the date or language preferences.
Remedy
The system version of your DVD recorder is already newer than the firmware on the
Upgrading is not supported for this configuration. Contact your Philips Customer Care Center.
The upgrade disc may be damaged or not properly recorded.
•If it is a
•If it is a
An error occurred during the upgrade procedure. Try once again. If the problem persists, contact your Philips Customer Care Center.
Reset the DVD Recorder as follows: Disconnect the recorder from the mains; reconnect it while holding the STANDBY/ON button pressed until the display lights up. You will need to redo the installation procedure.
3