Black & Decker CBM220 manual Liquid or under running water, Troubleshooting

7.Wipe grinding bowl, cover, base and other parts with a slightly damp cloth or sponge. Dry all parts thoroughly before reassembling.

8.To replace grinding assembly, set inside grinding bowl and twist slightly to the left until it falls into

place. Grasp lock and release knob and turn counterclockwise to lock assembly (F). You will hear a series of clicks as the selection dial rotates, and then a distinct pop once the assembly is locked in place.

	Important: Do not immerse grinding bowl, base or plug
F	in liquid or under running water.

9.Never use harsh detergents, abrasive cleansers or scouring pads to clean any part.

10.Use built-in cord wrap on underside of unit to store cord (G).

G

TROUBLESHOOTING

PROBLEM	POSSIBLE CAUSE	SOLUTION
Grinder stops working.	Ground coffee container has	Make sure discharge
	disengaged.	chute is clean and
	There are too many beans in	free of coffee grinds;
	grinding bowl.	a buildup of coffee
		grounds will cause
		ground coffee container
		to slip forward. Unplug
		appliance and remove
		some of the beans from
		grinding bowl.
Coffee tastes rancid.	Grinder has buildup of coffee	Oil in coffee beans will
	grounds.	become rancid if left
		in grinder. Make sure
		there are no beans left in
		grinder. Clean discharge
		chute and the ground
		coffee container after
		each use..
Coffee tastes like nuts or spices.	Grinder has been used for	Grinder will share
	other grinding operations.	flavors; purchase another
		grinder for spices and
		nuts.
Grinder will not start.	Grinder cover is not	Grinder cover snaps into
	completely closed.	place when completely
	Ground coffee container is	closed.
	not properly placed. Cover	Make sure cover on
	is not on the ground coffee	ground coffee container
	container. Outlet is not	is in place; push ground
	working.	coffee container securely
		back in base so that front
		is flush with base of the
		base.
		Check to make sure
		outlet is working.
The ground fineness selector is	The grinding blade is not	Remove grinding blade
not working.	correctly positioned.	and clean following
		directions in CARE AND
		CLEANING. Reattach
		grinding blade making
		sure it is fully integrated.

7 8