Step 4: Connecting the EcoCartTM to the mains
Feed the IEC connector end of the supplied 2m mains lead through the hole in the side of the trolley.
←ECO CART L16V & L20V Models
Plug the mains lead into the IEC socket on the side of the power module.
| ECO CART L30H Model → |
|
| Plug the mains lead into the IEC socket located at the |
|
ECO CART L16V & L20V | bottom of the centre pillar on the right hand side. | ECO CART L30H |
|
| |
|
| |
| Plug the trolley’s mains lead in to a switched wall socket and switch ON. | |
| Switch on the unit’s own ON/OFF switch located above the mains lead input. | |
| IMPORTANT - Ensure the wall socket switch is in the OFF position before | |
| connecting and removing the mains plug |
|
NOTE: When the unit is first turned ON, or after the mains power has been switched off, the unit will automatically divert to constant charging mode. To set the 24 hour timer, refer to Step 5 & 6 below.
IMPORTANT
Before moving the unit, first ensure the mains lead is disconnected from the wall socket and wrapped around the provided cable winder.
7
