In addition to this scan you can search any of the preprogrammed service or custom search ranges.
While scanning, press 
. Rotate the Scroll Control until you reach the desired service or custom search range. Press [L/O] to unlock it. You can also assign a System Quick Key to the search to make it easy to quickly enable/disable the search range for search and scan. The Search with Scan Hold time determines how long the scanner stays on a search before moving on. The default is 2 seconds. See Page 95 to change the Search with Scan settings.
Editing a Service Search
You can change the way service search works for each service. There are also two methods to reach the point of editing.
Method One
[MENU] Search for ... 
Edit Service 
Select a service range:
Air, CB Radio, UHF CB Radio, Racing, TV Broadcast, FM Broadcast, Police, Marine, Railroad 
Method Two
+ [SCAN/SEARCH]
Quick Search? Yes=”E” / No=”.”
Press [.No] then to Edit Service 
.
At this point you can edit each of the settings that comprise each custom search range.
The following show you how to set the various option settings associated with a Service. For each, your starting operation is
[MENU] Search for ... 
Edit Service 
Select a service range:
Set Delay Time
to select a value from 1 sec, 2 sec, 3 sec, 4 sec, 5 sec, and Off.
96
