Uniden UBCD996T manual Setting the System Hold Time, Setting ID Scan/ID Search, Setting Data Skip

Setting the System Hold Time C

[MENU] Program System Select a conventional system

Edit Sys Option

Set Hold Time

Set how long the scanner will remain scanning on this system before moving to the next system (up to 255 seconds). Note that the scanner will scan all unlocked channels at least one time, regardless of the system hold time setting.

Setting ID Scan/ID Search MEL

[MENU] Program System

Select a system

Edit Sys Option

ID Scan/Search

Sets whether the scanner only stops on talk groups you have programmed in (ID Scan) or whether the scanner stops on any unlocked channel (ID Search).

Setting Channel Delay Time MELCS

[MENU] Program System

Select a system

Edit Sys Option

Set Delay Time

This setting controls how many seconds the scanner waits after a transmission ends before resuming scanning. Enter a value from [1] to [5] or Off, then press .

Notes:
￿	The default setting is 2 seconds for each system.
	This setting applies to all channels within the system.
Setting Data Skip		C
[MENU] Program System
	Select a Conventional system

Edit Sys Option

Set Data Skip

This setting controls whether the scanner automatically skips channels it identifies as data. This includes channels with either no audio or a constant-level audio source. If turned on, the scanner resumes scanning as soon as it detects the data

signal.70