This setting determines whether the scanner automatically ignores transmissions found during Custom Search, Quick Search, or Close Call operation that are on common broadcasts, paging systems, and other annoyance radio sources. Note: Broadcast screening does not work in All service search ranges.
Set All Band On — turns on broadcast screen on each band. Set All Band Off — turns off broadcast screen on each band.
Set Each Band — lets you set broadcast screen only on specific bands you select. On or Off appears next to each option. Turn the Scroll Control to select an option then press 
to change the setting.
Pager — the scanner skips known paging system frequencies.
FM — the scanner skips known FM frequencies.
UHF TV — the scanner skips known UHF TV frequencies.
VHF TV — the scanner skips known VHF TV frequencies.
Band
Program Band — brings you to a menu setting to let you program a custom frequency range for broadcast screen. Turn the Scroll Control to select an option
then press 
to change the following setting.
To set the custom range of a band, select one and press 
to set the limit.
Band
Set Lower Limit— enter the lower limit of the frequency range, then press 
to set it.
Set Upper Limit — enter the upper limit of the frequency range, then press 
to set it.
To set the custom range of a band, select one and press 
to set the limit.
Finding Repeater Output Frequencies
[MENU] 
Srch/CloCall Opt 
106
