Setting Location Information | C |
[MENU] 
Program System 
Select a Conventional system 
Edit Sys Option 
Set LocationInfo 
This setting control whether the system is automatically enabled and disabled when you connect a GPS to the scanner.
Set Latitude — Enter the system’s latitude using the format you selected in the system settings.
Set Longitude — Enter the system’s longitude using the format you selected in the system settings.
Set Range — Set the system’s range using the units you selected in the system settings.
Set GPS Enable — L/O status is automatically controlled by receiving data from GPS.
Setting the Fleet Map | M (Type I Only) | |
[MENU] | Program System |
|
Select a Motorola Type I system 
Edit Sys Option 
Edit Fleet Map 
Preset — select from the 16 most common fleet maps
Custom — allows you to enter a custom fleet map. Enter the size code (0 to 14) for each block. Press to select.
For Motorola Type I systems, you must enter a system fleet map in order for the scanner to properly track and display talk group ID’s. The fleet map is usually included in the same resource that provided system frequencies and talk group ID lists.
Note: If you don’t know the fleet map for your Motorola Type I system, check the Internet such as www.radioreference.com or the other websites we reference.
71
