Set Delay Time — lets you set the amount of time the scanner will delay before continuing to search after a transmission ends.
Set Modulation — lets you set the custom search range’s modulation type.
Set Attenuator — lets you set whether the scanner will attenuate reception by 20 dB during search.
Set Data Skip — lets you set whether the scanner will skip data transmissions during search.
Set Step — lets you set the custom search range’s step (the gap between frequencies).
Set
Set Record — if during your listening to the selected service, if a transmission is received, choosing On will send an audio signal to the connected audio recording device.
Adjust P25 Level — adjusts the digital decode threshold to match the transmission you are hearing when it receives a strong signal and has a high decode rate.
Search with Scan — sets whether the scanner includes the custom search during scanning. If unlocked, the scanner first scans all selected systems, then searches the selected service searches for the selected hold time
Set Quick Key — lets you assign a Quick Key for the custom search range.
Set Startup Key — lets you decide which custom search range should be unlocked and scanned at power up
Set Lockout — lets you lock the custom search range for this session or permanently as with any other L/O action.
Set Hold Time — sets how long (seconds) the custom search range is checked before the scanner moves to the next programmed entry.
Search With Scan
When you press [SCAN/SEARCH] the UBCD996T starts a scan of those sites, channels, etc you have manually programmed or the Uniden preprogrammed data for your metropolitan area that are unlocked and have their System Quick key enabled.
95
