This setting controls whether the scanner treats the channel as a priority channel while scanning. Select On or Off, then press 
.
On — when you turn on the Priority feature, the channel will be scanned every 2 seconds.
Off — the channel will not be treated with priority. The default setting is Off.
Setting Channel Alert | MECL |
[MENU] Program System 
Select a system 
Edit Group 
Select a channel group 
Edit Channel 
Select the channel 
Set Alert 
Off — the scanner does not alert you when the channel becomes active.
Alert 1 - 9 — the scanner sounds an alert beep to notify you that the channel has become active. You can choose any of 9 different beep types. Once you choose an alert tone, then:
Set Level 
Auto — the scanner automatically sets the channel alert beep to match the master volume level.
Level 1 - 15 — the scanner adjusts the volume of the beep to the level you select.
Set Record | MECL |
[MENU] Program System 
Select a system 
Edit Group 
Select a channel group
Edit Channel 
Select a channel 
Set Record 
On — the scanner outputs the signal.
Off — the scanner does not output any audio.
90
