Set Attenuator
to select to choose an attenuation for all frequencies in the range. 
On — the frequencies are attenuated.
Off — the frequencies are not attenuated.
Set Record
to select to enable a live audio output from REC to an audio recording device. 
On — the scanner outputs the signal.
Off — the scanner does not output any audio.
Assigning a Search Range to a Search Key
You can assign any of the Service or Custom Searches to the six Search keys for quick access to your favorite searches.
[MENU] Search for ...
Set Search Key 
Select the key to assign
Select a search range
Now, to access that search, hold on any channel, then press 
and the number key [1] to [6] corresponding to the search range.
The default settings are:
SRCH 1: Custom 1
SRCH 2: Police
SRCH 3: Railroad
SRCH 4: Marine
SRCH 5: TV Broadcast
SRCH 6: FM Broadcast
Saving a Found Channel (Quick Save)
Press [EYES] to save a channel’s frequency if you hold on a channel or detect a channel, instead of using Direct Entry at another time. The alpha data is also stored. If a GPS unit is attached, the longitude and latitude data is saved and also becomes the name of the channel. For example, if the position is 32°57’33.60 N latitude and 97°05’34.18 W longitude, the name saved is
97
