Follow these steps to enter/edit the group name.

1. The current name displays with the first character of the name highlighted.

2. Rotate the Scroll Control to select a new first letter. Press [6] to move one character to the right. Repeat the Scroll Control action to change the character. To move one character to the left, press [4].

3. Repeat Step 2 until you have entered the system name. Then press to accept the setting.

Notes:

￿ Each group name can be up to 16 characters. Abbreviate as necessary to fit.

￿ The group and system (for conventional, SCAT, and LTR systems) or site (for Motorola and EDACS systems) name alternate in the top line of the display when the scanner stops on a channel.

￿ Press [.No] twice to delete the current character.

￿ Press [.No] three times to clear the entire alpha tag.

Setting the Group Quick Key

To assign a Quick Key to a Group, follow these steps. [MENU] ￿ Program System ￿

￿ Select a system ￿ ￿ Edit Group ￿ ￿ Select the Group ￿ ￿ Set Quick Key ￿

Select a desired quick key for this Group.

Editing Channels

MECL

Once you create a channel group, store channels in that group. See “ Programming Channels” on Page85 for specific channel options.

Locking Out Channel Groups

MECL

[MENU] ￿ Program System ￿

￿Select an existing system ￿

￿Edit Group ￿

￿Select an existing group ￿

￿Set Lockout ￿

84

Page 84
Image 84
Uniden UBCD996T manual Setting the Group Quick Key, Editing Channels, Locking Out Channel Groups