NETGEAR UTM10EW-100NAS, UTM25-100NAS, UTM25EW-100NAS manual Port Triggering Settings

ProSecure Unified Threat Management UTM10 or UTM25 Reference Manual

Table 5-10. Port Triggering Settings

Setting	Description (or Subfield and Description)
Name	A descriptive name of the rule for identification and management purposes.
Enable	From the pull-down menu, select Yes to enable the rule. (You can define a rule
	but not enable it.) The default setting is No.
Protocol	From the pull-down menu, select the protocol to which the rule applies:
	• TCP. The rule applies to an application that uses the Transmission Control
	Protocol (TCP).
	• UDP. The rule applies to an application that uses the User Control Protocol
	(UCP).
Outgoing (Trigger)	Start Port	The start port (1 - 65534) of the range for triggering.
Port Range
	End Port	The end port (1 - 65534) of the range for triggering.
Incoming (Response)	Start Port	The start port (1 - 65534) of the range for responding.
Port Range
	End Port	The end port (1 - 65534) of the range for responding.

3.Click the add table button. The new port triggering rule is added to the Port Triggering Rules table.

To edit a port triggering rule:

1.In the Port Triggering Rules table, click the edit table button to the right of the port triggering rule that you want to edit. The Edit Port Triggering Rule screen displays.

2.Modify the settings that you wish to change (see Table 5-10).

3.Click Apply to save your changes. The modified port triggering rule is displayed in the Port Triggering Rules table.

To display the status of the port triggering rules, click the Status option arrow at the top right of the Port Triggering screen. A popup window appears, displaying the status of the port triggering rules.

Figure 5-29

5-46 Firewall Protection

v1.0, September 2009