NETGEAR UTM25EW-100NAS, UTM25-100NAS, UTM10EW-100NAS manual IPsec VPN Connection Status Information

ProSecure Unified Threat Management UTM10 or UTM25 Reference Manual

2.Click the IPSec VPN Connection Status submenu tab. The IPSec VPN Connection Status screen displays.

Figure 11-14

The Active IPsec SAs table lists each active connection with the information that is described in Table 11-12. The default poll interval is 5 seconds. To change the poll interval period, enter a new value in the Poll Interval field, and then click set interval. To stop polling, click stop.

Table 11-12. IPsec VPN Connection Status Information

Item	Description (or Subfield and Description)
Policy Name	The name of the VPN policy that is associated with this SA.
Endpoint	The IP address on the remote VPN endpoint.
Tx (KB)	The amount of data that is transmitted over this SA.
Tx (Packets)	The number of IP packets that are transmitted over this SA.
State	The current status of the SA. Phase 1 is the authentication phase and Phase 2 is
	key exchange phase. If there is no connection, the statu is IPsec SA Not
	Established.
Action	Click the connect table button to build the connection or click the drop table
	button to terminate the connection.

To review the status of current SSL VPN tunnels:

1.Select Monitoring > Active Users & VPNs from the main menu. The Active Users & VPN submenu tabs appear, with the Active Users screen in views

Monitoring System Access and Performance 11-25

v1.0, September 2009