NETGEAR UTM10EW-100NAS, UTM25-100NAS manual Vlan Profile Settings, Vlan ID, Port Membership

ProSecure Unified Threat Management UTM10 or UTM25 Reference Manual

Table 4-1. VLAN Profile Settings

Setting	Description (or Subfield and Description)
VLAN Profile
Profile Name	Enter a unique name for the VLAN profile.
	Note: You can also change the profile name of the default VLAN.
VLAN ID	Enter a unique ID number for the VLAN profile. No two VLAN can have the
	same VLAN ID number.
	Note: You can enter VLAN IDs from 2 to 4093. VLAN ID 1 is reserved for the
	default VLAN; VLAN ID 4094 is reserved for the DMZ interface.
Port Membership
Port 1	Select one, several, or all port checkboxes to make the port(s) member of this
Port 2	VLAN.
Port 3	Note: A port that is defined as a member of a VLAN profile can send and
Port 4 / DMZ	receive data frames that are tagged with the VLAN ID.
LAN TCP/IP Setup
IP Address	Enter the IP address of the UTM (the factory default is 192.168.1.1).
	Note: Always make sure that the LAN port IP address and DMZ port IP address
	are in different subnets.
	Note: If you change the LAN IP address of the VLAN while being connected
	through the browser to the VLAN, you will be disconnected. You must then
	open a new connection to the new IP address and log in again. For example, if
	you change the default IP address 192.168.1.1 to 10.0.0.1, you must now enter
	https://10.0.0.1 in your browser to reconnect to the Web Management
	Interface.
Subnet Mask	Enter the IP subnet mask. The subnet mask specifies the network number
	portion of an IP address. Based on the IP address that you assign, the UTM
	automatically calculates the subnet mask. Unless you are implementing
	subnetting, use 255.255.255.0 as the subnet mask (computed by the UTM).
DHCP
Disable DHCP Server	If another device on your network is the DHCP server for the VLAN, or if you
	will manually configure the network settings of all of your computers, select the
	Disable DHCP Server radio button to disable the DHCP server. This is the
	default setting.

4-8 LAN Configuration

v1.0, September 2009