ProSecure Unified Threat Management UTM10 or UTM25 Reference Manual

Table 2-1. Setup Wizard Step 1: LAN Settings (continued)

Setting

Description (or Subfield and Description)

 

 

 

Enable DHCP Server

Primary DNS

This is optional. If an IP address is specified, the UTM provides

(continued)

Server

this address as the primary DNS server IP address. If no

 

 

address is specified, the UTM provides its own LAN IP address

 

 

as the primary DNS server IP address.

 

 

 

 

Secondary

This is optional. If an IP address is specified, the UTM provides

 

DNS Server

this address as the secondary DNS server IP address.

 

 

 

 

WINS Server

This is optional. Enter a WINS server IP address to specify the

 

 

Windows NetBios server, if one is present in your network.

 

 

 

 

Lease Time

Enter a lease time. This specifies the duration for which IP

 

 

addresses are leased to clients.

 

 

 

DHCP Relay

Select the DHCP Relay radio button to use the UTM as a DHCP relay agent for

 

a DHCP server somewhere else on your network. Enter the following setting:

 

 

 

 

Relay

The IP address of the DHCP server for which the UTM serves

 

Gateway

as a relay.

 

 

 

Enable LDAP information

Select the Enable LDAP information checkbox to enable the DHCP server to

 

provide Lightweight Directory Access Protocol (LDAP) server information. Enter

 

the settings below.

 

Note: The LDAP settings that you specify as part of the VLAN profile are used

 

only for SSL VPN and UTM authentication, but not for Web and e-mail security.

 

 

 

 

LDAP Server

The IP address or name of the LDAP server.

 

 

 

 

Search Base

The search objects that specify the location in the directory

 

 

tree from which the LDAP search begin. You can specify

 

 

multiple search object, separated by commas. The search

 

 

objects include:

 

 

• cn (for common name)

 

 

• ou (for organizational unit)

 

 

• o (for organization)

 

 

• c (for country)

 

 

• dc (for domain)

 

 

For example, to search the Netgear.net domain for all last

 

 

names of Johnson, you would enter:

 

 

cn=Johnson,dc=Netgear,dc=net

 

 

 

 

port

The port number for the LDAP server. The default setting is

 

 

zero.

 

 

 

2-10

Using the Setup Wizard to Provision the UTM in Your Network

v1.0, September 2009

Page 41 Page 43
Page 42
Image 42
NETGEAR UTM25-100NAS, UTM10EW-100NAS, UTM25EW-100NAS manual Setting Description or Subfield and Description
Page 41 Page 43
Top Page Image Contents