4 Installing the
6. Click Submit to apply the changes to the switch.
To view information about whether the switch successfully polled the IP address you entered, click the Monitoring > Global > IP Discovery tab.
The following example shows how to add an address to the L3 Discovery list by using the CLI.
1.From a Telnet, SSH, or serial connection, log on to the
2. Add the IP address of a peer switch or AP to the discovery list:
From the CLI, you can only add one IP address at a time.
3.Enter CTRL + Z to return to Privileged EXEC mode.
4.Save the changes to the configuration file:
This operation may take a few minutes.
Management interfaces will not be available during this time.
Are you sure you want to save? (y/n) y
Configuration Saved!
To check the managed AP status from the WCS CLI, enter the following command:
Setting the Switch IP Address in the D-Link Access Point
You can connect to the
Discovering Access Points and Peer Switches 67
