D-Link DWS 3000 user manual Viewing Managed Access Point VAP Statistics

D-Link Unified Access System User Manual

Table 37. Managed Access Point Radio Statistics

Field	Description
Multicast Frames Transmitted	Count of successfully transmitted MSDU frames where the
	multicast bit is set in the destination MAC address.
Duplicate Frame Count	Number of times a frame is received and the Sequence
	Control field indicates is a duplicate.
Failed Transmit Count	Number of times a MSDU is not transmitted successfully due
	to transmit attempts exceeding either the short retry limit or
	the long retry limit.
Transmit Retry Count	Number of times a MSDU is successfully transmitted after
	one or more retries.
Multiple Retry Count	Number of times a MSDU is successfully transmitted after
	more than one retry.
RTS Success Count	Count of CTS frames received in response to an RTS frame.
RTS Failure Count	Count of CTS frames not received in response to an RTS
	frame.
ACK Failure Count	Count of ACK frames not received when expected.
FCS Error Count	Count of FCS errors detected in a received MPDU frame.
Frames Transmitted	Count of each successfully transmitted MSDU.
WEP Undecryptable Count	Count of encrypted frames received and the key configuration
	of the transmitter indicates that the frame should not have
	been encrypted or that frame was discarded due to the
	receiving station not implementing the privacy option.

Viewing Managed Access Point VAP Statistics

The VAP statistics show information about the client failures and number of packets and bytes

transmitted and received on each VAP on radio one or two for a particular access point managed by the switch.

Table 38 describes the fields you see on the VAP page for the managed access point statistics.

Table 38. Managed Access Point VAP Statistics

Field	Description
MAC Address -Location	Shows the MAC address and location of the AP to which the
(Drop-down Menu)	values on the page apply. To view information about a different
	AP, select its MAC address from the drop-down menu.
Radio	Indicates a radio interface and its configured mode. Select one of
(ex. 1-802.11g)	the radios to view its VAP statistics.
VAP ID	Select one of the 8 VAPs from the drop-down menu to display its
	statistics. All VAPs are available regardless of whether they are
	enabled.
WLAN Packets Received	Total packets received by the AP on this VAP.
WLAN Bytes Received	Total bytes received by the AP on this VAP.
WLAN Packets Transmitted	Total packets transmitted by the AP on this VAP.
WLAN Bytes Transmitted	Total bytes transmitted by the AP on this VAP.

134 © 2001- 2006 D-Link Corporation/D-Link Systems, Inc. All Rights Reserved.