D-Link DWS 3000 user manual Viewing Managed Access Point Radio Summary Information

D-Link Unified Access System User Manual

Table 28. Detailed Managed Access Point Status

Field	Description
Configuration	This status indicates if the AP is configured successfully with the assigned
Status	profile. The status is one of the following:
	• Not Configured - The profile has not been sent to the AP yet, the AP
	may be discovered but not yet authenticated.
	• In Progress - The switch is currently sending the AP profile
	configuration packet to the AP.
	• Complete Success - The entire profile has been sent to the AP and there
	were no configuration errors.
	• Partial Success - The entire profile has been sent to the AP and there
	were configuration errors, but the AP is operational.
	• Failure - The profile has been sent to the AP and there were
	configuration errors, the AP is not operational.
Protocol Version	Indicates the protocol version supported by the software on the AP, this is
	learned from the AP during discovery.
Software Version	Indicates the version of software on the AP, this is learned from the AP
	during discovery.
Last Failing	If the configuration status indicates a partial success or complete failure, this
Configuration	field indicates the last element that failed during configuration. This field is
Element	only visible if there is a failed element.
Configuration	If the configuration status indicates a partial success or complete failure, this
Failure Error	field contains an ASCII string filled in by the AP containing the error
Message	message for the last failing configuration element.
Code Download	This indicates the current status of a code download request for this AP. The
Status	possible values include the following:
	• Not Started - A code download has not been requested for the AP.
	• Requested - A code download has been requested for the AP, the switch
	has not processed the request.
	• In Progress - The switch is processing a code download request for the
	AP.
	• Success - The AP has successfully downloaded the new software image.
	• Failure - The AP failed to download the new software image.
Associated Clients	Total number of clients currently associated to the AP. This is the sum of all
	associated clients for all the VAPs enabled on the AP. Association is a
	transitional state.
Authenticated	Total number of clients currently authenticated to the AP. This is the sum of
Clients	all authenticated clients for all the VAPs enabled on the AP.
System Uptime	Time in seconds since last power-on reset of the managed AP.
Age	Time since last communication between the WDS and the AP.

Viewing Managed Access Point Radio Summary Information

You can view general information about each operational radio on all APs managed by the

switch. The Managed Access Point Radio Summary page shows the channel, transmit power, and number of associated wireless clients for all managed APs. For more information about a specific radio on an AP, click the radio.

126 © 2001- 2006 D-Link Corporation/D-Link Systems, Inc. All Rights Reserved.