BT Synergy 700 Remote access, After 15 seconds the handset will automatically return to standby

Synergy 700 user guide ~ 7th Edition ~ 13th May ’02 ~ 4411

Remote access

You can turn your Synergy 700 answering machine on and off and listen to your messages from any TouchtoneTM telephone. To protect your privacy, messages can only be accessed by entering a 3-digit security code.

Note

After 15 seconds the handset will automatically return to standby.

The pre-set code is 000 and can be changed. If you change the code it is advisable that you make a note of it somewhere safe.

To change your security PIN code

To switch your answering machine on remotely

If you go out and forget to turn your answering machine on you can switch it on remotely.

Dial your telephone number.

REMOTE

en
M u
W
XY
9	Z

cre
Se	cy

Press the  button twice.

Press the 9 button.

To set a new security PIN code press ✱.

You will hear a beep, followed by, “Please enter new security code after the tone”.

Enter a 3-digit code of your choice.

The prompt will announce the new security PIN code.

To confirm your security code press #.

Press and hold the ✘ button to return to standby.

Let the phone ring for 20 rings until you hear your outgoing message.

Press the ✱ button.

Enter your security code.

S	Press the 7 button within 8
P
QR

7

seconds. You will hear “Answer On” and your answering machine will now be switched on to answer incoming calls.

Note

If you have new messages they will be played after you have entered your security code.

ACCESS

46