Synergy 700 user guide ~ 7th Edition ~ 13th May ’02 ~ 4411
After the tone enter the day, followed by the time using the 24 hour clock.
1 = Sun, 2 = Mon,
3 = Tues, 4 = Wed,
5 = Thur, 6 = Fri, 7 = Sat.
For example:
1 1415 = Sunday 2.15pm.
Or
5 0915 = Thursday 9.15am.
You will then hear your setting confirmed.
cre | Press the ✘ button twice to | ||
Se | cy | ||
| |||
return the handset to standby.
Note
If the day and time is entered incorrectly, the prompt will announce, “Incorrect, please set again”. Enter the correct setting within 15 seconds otherwise the handset will return to standby mode. If the day and time is entered incorrectly three times the handset will return to standby.
Please see the table below for your Synergy 700 default settings.
Synergy 700 Default Settings Table
Feature | Default Setting | |
Day/Time Stamp | Sunday 12:01 pm | |
|
| |
Answer Delay | Your answering | |
| machine will answer | |
| after 6 rings | |
|
| |
Audible Message | OFF | |
Alert Tone | ||
| ||
|
| |
Outgoing Message | Answer and Record | |
| “Hello your call cannot | |
| be taken at the | |
| moment so please | |
| leave your message | |
| after the tone.” | |
|
| |
Answer Mode | ON | |
|
| |
Base ringer level | High | |
|
| |
Base loudspeaker | Level 5 | |
volume | ||
| ||
|
| |
PIN code | 0000 | |
|
| |
Dialling mode | Tone |
If you wish to personalise your answering machine settings, for example record your own outgoing message etc, please see “Setting up and personalising your answering machine” beginning on page 31.
SETTING UP
Note
If you have any difficulties setting up your Synergy 700 please call the Helpline on 08706 058 047.
If you wish to register additional handsets, please see page 49.
The Synergy 700 answering machine will now be switched ON and set to its default settings so your Synergy 700 is now ready for use.
14
