Synergy 700 user guide ~ 7th Edition ~ 13th May ’02 ~ 4411
ANSWER MACHINE
To change the answer delay setting
Press and hold the SKIP button on the base unit until the current setting is announced, then release.
Press and release the SKIP button to move through the settings, with each press the options will be announced and will also be shown on the base unit display, i.e 8, 9, Time Saver, (see page 47) 2, 3, 4, 5, 6, 7.
When you hear the setting you want, do not press the SKIP button again. After a short delay your chosen setting will be announced.
To check the answer delay setting at the base station
Press and release the SKIP button.
The current setting will be announced and also shown on the base unit display.
Audible Message alert
When new messages have been received, your Synergy 700 will beep every 10 seconds (when audible message is switched ON). The volume of the beep is at the volume you have set for the loudspeaker. The default setting is OFF.
To switch audible message alert ON or OFF
When the answering machine is set to ON and in the idle mode:
Press and hold the SKIP button on the base unit to change the setting.
The prompt will announce “Message alert on/off” as appropriate.
33
