
3 Installing the Hardware
Fasten the mounting brackets to the Switch using the screws provided. With the brackets attached securely, the Switch can be mounted in a standard rack as shown in Figure 19.
Figure 19. Mounting the Switch in a Standard 19" Rack
Powering On the Switch
Plug one end of the AC power cord into the power connector of the Switch and the other end into the local power source outlet.
After powering on the Switch, the LED indicators will momentarily blink. This blinking of the LED indicators represents a reset of the system.
Power Failure
As a precaution, in the event of a power failure, unplug the Switch. When power is resumed, plug the Switch back in.
Installing the SFP ports
The
Installation 43