selection and automatic power adjustment. Figure 2 shows a deployment with one
Figure 2. Single WCS with Layer 2 Roaming Support
Wireless Controller
Switch
Terminal with Direct
Serial Connection
L2 Network
Remote Management
Station
AP 1 | AP 2 | AP 3 |
When the APs are on the same subnet and have the same SSID, wireless clients can seamlessly roam among the three APs with no interruption in network access. The client keeps the same IP address and does not need to
Peer Switch WCS Deployment
To support larger networks, you can configure up to four switches as peers, which increases the size and range of the WLAN. Figure 3 shows a
22 © 2001- 2006