Table 40. Access Point RF Scan Status
| Field | Description | |
| MAC Address | The Ethernet MAC address of the detected AP, this could be a physical radio | |
|
| interface or VAP MAC. For | |
|
| MAC address. | |
|
|
|
|
| SSID | Service Set ID of the network, this is broadcast in detected beacon frame. | |
|
|
|
|
| Physical Mode | Indicates the 802.11 mode being used on the AP. | |
|
|
|
|
| Channel | Transmit channel of the AP. | |
|
|
|
|
| Status | Indicates the managed status of the AP, whether this is a valid AP known to | |
|
| the switch or a Rogue on the network. The valid values are: | |
|
| • WS Managed - The neighbor AP is managed by this switch, the | |
|
| neighbor AP status can be referenced using its base MAC address. | |
|
| • Peer WS Managed - The neighbor AP is managed by another switch | |
|
| within the peer group. | |
|
| • Acknowledged Rogue - The AP is configured as a valid AP entry (local | |
|
| or RADIUS), it has been acknowledged and is not reported as Rogue. | |
|
| • Ad Hoc Rogue - The AP neighbor was detected participating in an ad | |
|
| hoc network. | |
|
|
|
|
| Transmit Rate | Indicates the rate at which the AP is currently transmitting data. | |
|
|
|
|
| Beacon Interval | Beacon interval for the neighbor AP network. | |
|
|
|
|
| Discovered Age | Time in seconds since this AP was first detected in an RF scan. | |
|
|
|
|
| Age | Time in seconds since this AP was last detected in an RF scan. | |
|
|
|
|
|
|
|
|
Monitoring Associated Client Information
You can view a variety of information about the wireless clients that are associated with the APs the switch manages. To access the associated client information, click Monitoring > Client > Associated Clients.
Figure 63. Associated Client Status
The following tabs are available:
138 © 2001- 2006