ProSecure Unified Threat Management UTM10 or UTM25 Reference Manual

You can choose a variety of WAN options if the factory default settings are not suitable for your installation. These options include enabling a WAN port to respond to a ping, and setting MTU size, port speed, and upload bandwidth.

4.Prepare to physically connect the firewall to your cable or DSL modems and a computer. Instructions for connecting the UTM are in the ProSecure Unified Threat Management UTM10 or UTM25 Installation Guide.

Cabling and Computer Hardware Requirements

To use the UTM in your network, each computer must have an Ethernet Network Interface Card (NIC) installed and must be equipped with an Ethernet cable. If the computer will connect to your network at 100 Mbps or higher speeds, you must use a Category 5 (CAT5) cable.

Computer Network Configuration Requirements

The UTM integrates a Web Management Interface. To access the configuration menus on the UTM, your must use a Java-enabled Web browser that supports HTTP uploads such as Microsoft Internet Explorer 5.1 or higher, Mozilla Firefox l.x or higher, or Apple Safari 1.2 or higher with JavaScript. Free browsers are readily available for Windows, Macintosh, or UNIX/Linux.

For the initial connection to the Internet and configuration of the UTM, you must connect a computer to the UTM, and the computer must be configured to automatically get its TCP/IP configuration from the UTM via DHCP.

Note: For help with the DHCP configuration, see the “TCP/IP Networking Basics” document that you can access from the link in Appendix E, “Related Documents.”

The cable or DSL modem broadband access device must provide a standard 10 Mbps (10BASE-T) Ethernet interface.

Internet Configuration Requirements

Depending on how your ISPs set up your Internet accounts, you will need the following Internet configuration information to connect UTM to the Internet:

Host and domain names

One or more ISP login names and passwords

ISP Domain Name Server (DNS) addresses

One ore more fixed IP addresses (also known as static IP addresses)

Network Planning for Dual WAN Ports (UTM25 Only)

B-3

v1.0, September 2009

Page 425
Image 425
NETGEAR UTM25EW-100NAS manual Cabling and Computer Hardware Requirements, Computer Network Configuration Requirements