NETGEAR UTM25-100NAS, UTM10EW-100NAS, UTM25EW-100NAS manual Settings below

ProSecure Unified Threat Management UTM10 or UTM25 Reference Manual

Table 4-1. VLAN Profile Settings (continued)

Setting	Description (or Subfield and Description)
Enable LDAP	Select the Enable LDAP information checkbox to enable the DHCP server to
information	provide Lightweight Directory Access Protocol (LDAP) server information. Enter
	the settings below.
	Note: The LDAP settings that you specify as part of the VLAN profile are used
	only for SSL VPN and UTM authentication, but not for Web and e-mail security.
	LDAP Server	The IP address or name of the LDAP server.
	Search Base	The search objects that specify the location in the directory
		tree from which the LDAP search begin. You can specify
		multiple search object, separated by commas. The search
		objects include:
		• cn (for common name)
		• ou (for organizational unit)
		• o (for organization)
		• c (for country)
		• dc (for domain)
		For example, to search the Netgear.net domain for all last
		names of Johnson, you would enter:
		cn=Johnson,dc=Netgear,dc=net
	port	The port number for the LDAP server. The default setting is
		zero.
DNS Proxy
Enable DNS Proxy	This is optional. Select the Enable DNS Proxy radio button to enable the UTM
	to provide a LAN IP address for DNS address name resolution. This setting is
	enabled by default.
	Note: When you deselect the Enable DNS Proxy radio button, the UTM still
	services DNS requests that are sent to its LAN IP address unless you disable
	DNS Proxy in the firewall settings (see “Attack Checks” on page 5-20).

4.Click Apply to save your settings.

Note: Once you have completed the LAN setup, all outbound traffic is allowed and all inbound traffic is discarded except responses to requests from the LAN side. To change these default traffic rules, see Chapter 5, “Firewall Protection.

4-10 LAN Configuration

v1.0, September 2009