ProSecure Unified Threat Management UTM10 or UTM25 Reference Manual

Creating and Deleting Groups

To create a VPN group:

1.Select Users > Groups from the menu. The Groups screen displays. Figure 9-3shows the UTM’s default group—geardomain—and, as an example, several other groups in the List of Groups table.

Figure 9-3

The List of Groups table displays the VPN groups with the following fields:

Checkbox. Allows you to select the group in the table.

Name. The name of the group. If the group name is appended by an asterisk, the group was created by default when you created the domain with the identical name as the default group.You cannot delete a default group; you can only delete the domain with the identical name, which causes the default group to be deleted.

Domain. The name of the domain to which the group is assigned.

Action. The edit table button that provides access to the Edit Group screen.

2.In the Add New Group section of the screen, enter the settings as explained in Table 9-3 on page 9-8.

Managing Users, Authentication, and Certificates

9-7

v1.0, September 2009

Page 313
Image 313
NETGEAR UTM10EW-100NAS, UTM25-100NAS, UTM25EW-100NAS manual Creating and Deleting Groups