NETGEAR UTM25-100NAS Assigning IP Addresses to Remote Users Mode Config, Mode Config Operation

ProSecure Unified Threat Management UTM10 or UTM25 Reference Manual

Note: You select the RADIUS authentication protocol (PAP or CHAP) on the Edit IKE Policy screen or Add IKE Policy screen (see “Configuring XAUTH for VPN Clients” on page 7-38).

Assigning IP Addresses to Remote Users (Mode Config)

To simplify the process of connecting remote VPN clients to the UTM, use the Mode Config feature to assign IP addresses to remote users, including a network access IP address, subnet mask, WINS server, and DNS address from the UTM. Remote users are given IP addresses available in a secured network space so that remote users appear as seamless extensions of the network.

Mode Config Operation

After the IKE Phase 1 negotiation is complete, the VPN connection initiator (which is the remote user with a VPN client) requests the IP configuration settings such as the IP address, subnet mask, WINS server, and DNS address from the UTM. The Mode Config feature allocates an IP address from the configured IP address pool and activates a temporary IPsec policy, using the information that is specified in the Traffic Tunnel Security Level section of the Mode Config record (on the Add Mode Config Record screen that is shown in Figure 7-26 on page 7-44).

Note: After configuring a Mode Config record, you must manually configure an IKE policy and select the newly-created Mode Config record from the ‘Select Mode Config Record’ pull-down menu (see “Configuring Mode Config Operation on the UTM” on page 7-42. You do not need to make changes to any VPN policy.

Note: An IP address that is allocated to a VPN client is released only after the VPN client has gracefully disconnected or after the SA liftetime for the connection has timed out.

Configuring Mode Config Operation on the UTM

To configure Mode Config on the UTM, you first must create a Mode Config record, and then select the Mode Config record for an IKE policy:

1.Select VPN > IPSec VPN from the menu. The IPsec VPN submenu tabs appear with the IKE Policies screen in view.

7-42 Virtual Private Networking Using IPsec Connections

v1.0, September 2009